BKHWM - AUTOMATIC TRANSMISSION FLUID TYPE FA
- MSDS: BKHWM
- Manufacturer: VALVOLINE INC SUBSIDIARY OF ASHLAND OIL
- Product Name: AUTOMATIC TRANSMISSION FLUID TYPE FA
- National Stock Number: 9150-01-092-9755
Product Identification
Product ID:AUTOMATIC TRANSMISSION FLUID TYPE FA
MSDS Date:02/20/1990
FSC:9150
NIIN:01-092-9755
MSDS Number: BKHWM
Responsible Party
Emergency Phone: (606) 264-7000
Info Phone: (606) 264-7000
Cage: LO750
Contractor
Telephone: 606-357-7206 / 800-274-5263
Cage: 72527
Ingredients
ALIPHATIC PETROLEUM DISTILLATES
CAS: 64741-77-1
Fraction By Weight: >60%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5 MG/CUM
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Explanation of Carcinogenicity:NONE
First Aid
First Aid:SKIN: THOROUGHLY WASH EXPOSED AREA W/SOAP & WATER. EYES:
FLUSH W/LARGE AMOUNTS OF WATER. INGESTION: DON'T INDUCE VOMITING.
INHALATION: IF AFFECTED, REMOVE INDIVIDUAL TO FRESH AIR. IF
BREATHING IS DIFF ICULT, ADMINISTER OXYGEN. IF BREATHING HAS
STOPPED GIVE ARTIFICIAL RESPIRATION. KEEP PERSON WARM, QUIET &
OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:390F
Lower Limits:1.1%
Extinguishing Media:REGULAR FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS W/FULL
FACEPIECE OPERATED IN THE POSITIVE PRESSURE DEMAND MODE. WATER/FOAM
MAY CAUSE FROTHING WHICH CAN BE VIOLENT.
Unusual Fire/Explosion Hazard:NEVER USE WELDING OR CUTTING TORCH ON OR
NEAR DRUM (EVEN EMPTY) BECAUSE PRODUCT (EVEN JUST RESIDUE) CAN
IGNITE EXPLOSIVELY.
Accidental Release
Spill Release Procedures:ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR
ABSORBENT OR OTHER ABSORBENT MATERIAL. PREVENT RUN-OFF TO SEWERS,
STREAMS ON OTHER BODIES OF WATER. STOP SPILL AT SOURCE, DIKE AREA
OF SPILL TO PREVENT SPREA DING, PUMP LIQUID TO SALVAGE TANK.
Handling
Handling and Storage Precautions:DON'T TRANSFER TO UNLABELED CONTAINER.
DON'T USE CUTTING OR WELDING TORCH ON THIS CONTAINER (EVEN EMPTY).
FOR INDUSTRIAL USE ONLY.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTIED. SINCE EMPTIED CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR,
LIQUID, &/OR SOLID). CONTAINS: PETROLEUM OIL.
Exposure Controls
Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE
Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE
Protective Gloves:NOT NORMALLY REQUIRED
Eye Protection:NOT NORMALLY REQUIRED
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
RE-USE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:>425F
Vapor Density:>1.0
Spec Gravity:0.880
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:RED COLOR, LIQUID, HOMOGENEOUS SOLUTION.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. DESTROY BY LIQUID INCINERATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.